Changelog¶

v0.2.0¶

Redesigned Overview tab to match mactop layout: 4 gauge blocks (CPU, GPU/Load, Temperature, Memory), 4 info panels (Power, Board, Network, Disk), and an embedded process list (no sparklines)
Process list keyboard shortcuts (j/k/s/K) now work on the Overview tab in addition to the Processes tab
Disk info panel strips /dev/ prefix and shows device name + mountpoint on separate lines
GPU section now shows V3D clock frequency (960 MHz) instead of core clock on Pi 5
GPU memory reported as "Shared" on Pi 5 (which uses shared system memory)
GPU codec display shows "Hardware HEVC (BCM2712)" instead of disabled codec marks on Pi 5
Automatic update check on startup with install command shown in footer

Zero 2W detection fixed: now matches bcm2837 in addition to bcm2710
CPU model detection on ARM64: maps CPU part numbers to names (0xd03=Cortex-A53, 0xd0b=Cortex-A76, etc.)
All known Pi models now mapped: Pi 5, Pi 4B, Pi 400, CM4, Pi 3B+, Pi 3B, Pi 3A+, Pi 2B, Pi 1, Zero 2W, Zero W, Zero
NVMe temperature shown from hwmon sensor discovery

Fan detection fixed: now matches pwmfan hwmon name in addition to cooling_fan
PMIC power parser fixed for Pi 5 format with RAIL_A current(N)=VALUE style output
PCIe downgrade detection: only speed drops are flagged as downgrades, not width mismatches (Pi 5 M.2 HAT is x1 by design)
PoE detection: infers online=true when device exists with type=Mains

Power and voltage data now collected on the Overview tab (not just the Power tab)
Automatic update checker runs at startup and displays available update in footer with install command

Initial release of pitop.

ratatui + crossterm terminal application with alternate screen
Tab bar with 6 tabs: Overview, Processes, Power, Network, Disk, System
Overview dashboard with CPU gauges, memory bars, temperature, network throughput
Sparkline history graphs (60-sample ring buffers)
Keyboard navigation: number keys, Tab/Shift+Tab, vim bindings
Pause/resume with Space bar
Panic hook for terminal restoration

Processes tab -- sortable table (PID, Name, CPU%, MEM, User) with kill support
Network tab -- interface details with IPv4/IPv6, MAC, throughput sparklines
Disk tab -- partition usage gauges, I/O throughput
System tab -- board model, kernel, architecture, uptime, capabilities

PMIC power rails (Pi 5) -- 12-rail voltage/current/power table via vcgencmd pmic_read_adc
Estimated wattage with correction factor and sparkline
Fan monitoring (Pi 5) -- RPM and duty cycle from hwmon
PCIe link status (Pi 5) -- generation, lane width, downgrade detection
PoE HAT detection (Pi 5, Pi 4B) -- power supply status
Voltage readings (Pi 4B, Zero 2W) -- core and SDRAM voltages via vcgencmd measure_volts